Latham Corinthian 12 BME fiberglass pool installed

Corinthian 12 BME: 12' x 25'

A timeless rectangle with a full-width tanning ledge and clean lines.

Latham Pool Grand Builder gold dealer seal

Installed by a Latham Grand Dealer

Size12' x 25'
Depth3'6" – 5'5"
Volume~5,100 gallons
ShapeRectangle
Built-in featuresBME configuration; tanning ledge, swim-up seating, auto-cover ready

Turnkey installed

from $60,995

Central Valley pricing. Prices are subject to change based on distance from Hanford, CA.

Excavation, shell, equipment, plumbing, standard freight, 3' concrete decking, plans, permitting and taxes — included.

Get My Exact Price — Free Site Visit

Specs come from Latham’s official 2026 catalog. Size and volume may vary up to 3%. Screen colors are close, not exact. We bring real finish and tile samples to every design visit.

Will the Corinthian 12 BME fit your yard?

The Corinthian 12 BME shell measures 12' x 25' at the water’s edge. With the 3’ of concrete decking that is already in the price on every side, the finished pad is about 18' by 31' — tape that out in the yard first. Setbacks are extra: your city or county fixes how far the water must sit from property lines and the house, and on a compact lot that rule usually decides where the pool goes. We look it up before drawing the site plan (how permits work here).

In the 2026 California-built lineup the Corinthian 12 BME is one of the compact models: 35 of the other 46 models are longer and 11 hold less water. It ships as one molded piece from Latham’s Williams, CA plant and a crane lowers it into the hole, so a narrow side yard is not the problem people expect — the crane reaches over the fence.

Depth, seating and who the Corinthian 12 BME suits

It runs from 3'6" at the entry to 5'5" at the far end — chest to shoulder deep for most adults, deep enough to feel like real swimming, shallow enough that nobody is out of their depth.

Built into the Corinthian 12 BME: a tanning ledge molded into the shell — a few inches of water for loungers, toddlers and the dog, swim-up seating along the wall so adults can sit in the water and talk, an auto-cover-ready coping line, so an automatic safety cover fits without a custom track, and Latham’s BME configuration of the shell.


Pick your Corinthian 12 BME color & tile

Every Latham shell comes in your choice of gelcoat finish. You pick the waterline tile too. Tap a swatch to see it on the design board. We’ll include it with your quote request below. Or skip it and choose with real samples in hand at your free design visit.

Waterline tile

Optional — tap to choose

Interior finish

Optional — tap to choose
Latham Corinthian 12 BME fiberglass pool installed
Waterline tile preview
Interior finish preview — tap a swatch

Corinthian 12 BME · tap a finish and a tile to build your look

Colors are simulated. Real water color changes with sunlight and depth. We bring real samples to every design visit.

Corinthian 12 - Crystite Crystal Coastal Bronze

What every turnkey fiberglass install includes

Our “from” prices are for a fully installed swimming pool — not a bare shell in your driveway. Every turnkey Latham install includes:

Popular upgrades — priced up front

No mystery options list. These are the same prices that appear on our written estimates — tap any upgrade to add it to your quote request at the bottom of this page.

Nothing added yet. Tap an upgrade above and it will go with your quote request below.

Want more? Heaters, automation, decking beyond the included 3' band, and more are quoted per project — just ask.

Central Valley pricing. Prices are subject to change based on distance from Hanford, CA. “From” prices are full installed prices for a standard site in our Hanford-area service zone. Delivery outside the standard freight zone, tight access, tough soil and options are quoted per project. You always get a final written number before you sign anything. Prices shown are current 2026 factory pricing and can be updated. The price on a model’s page is the number your written estimate opens with.

Corinthian 12 BME vs the standard Corinthian 12

Latham lists this shell in two configurations. The BME is the second of them, and on a small lot the choice changes nothing about where the pool can go: Latham does not publish separate dimensions for the BME, so the Corinthian 12 BME carries the Corinthian 12’s numbers exactly — 12' x 25', 3'6" – 5'5" deep, about 5,100 gallons. Same footprint means the same excavation, the same 18' × 31' of working room around the shell, and the same crane pick on set day.

What actually differs on a quote is $2,000: the Corinthian 12 BME is published from $60,995 against $58,995 for the Corinthian 12. If nothing has pointed you at the BME configuration specifically, price the Corinthian 12 first — it is the same water for $2,000 less, and everything on this page about depth, volume and running cost applies to it unchanged.

Corinthian 12 BME vs. the models next to it

The Corinthian 12 BME is one of 6 Corinthian models built in California this year. Same shape language, different size and price:

ModelSizeDepthVolumeInstalled
Corinthian 1212' x 25'3'6" – 5'5"5,100 galfrom $58,995
Corinthian 12 BME12' x 25'3'6" – 5'5"5,100 galfrom $60,995
Corinthian 1414' x 30'3'6" – 6'8,200 galfrom $69,995
Corinthian 14 BME14' x 30'3'6" – 6'8,200 galfrom $71,995
Corinthian 1615'10" x 40'3'6" – 7'15,400 galfrom $83,995
Corinthian 16 BME15'10" x 40'3'6" – 7'15,400 galfrom $84,995

Stepping up to the Corinthian 14 adds 5' of length and 3,100 gallons for $9,000 more. Against the Corinthian 12, the Corinthian 12 BME carries 0 more gallons for $2,000 more. Same turnkey basis on every line, so the numbers compare straight across.

Owning a Corinthian 12 BME in the Central Valley

Hanford runs past 100°F for weeks every summer, and an uncovered pool can lose around a quarter inch of water a day to evaporation. On the Corinthian 12 BME’s roughly 300 square feet of water surface that is on the order of 50 gallons a day in July — the single best argument for an automatic cover on this model (the shell is already cut for one). A cover also holds heat overnight, which matters more on a 5,100-gallon pool than the brochure suggests.

Volume drives running cost. At 5,100 gallons the Corinthian 12 BME needs a fraction of the chemicals a 15,000-gallon pool does, and the first fill takes about 9 hours from a garden hose at 500–600 gallons an hour — we start it the day the shell is set and plumbed. Our own Hanford crew handles the install, the permit and, if you want it, the weekly service afterward.

Corinthian 12 BME questions

How much does the Corinthian 12 BME cost installed in Hanford?

The Corinthian 12 BME starts at $60,995 turnkey: excavation, the shell, equipment, plumbing, standard freight, 3’ of concrete decking, plans, permitting and taxes. Central Valley pricing. Prices are subject to change based on distance from Hanford, CA. California law caps the down payment at the lesser of 10% or $1,000, and we bill only for work that is done.

How big is the Corinthian 12 BME, and how much yard does it need?

The shell is 12' x 25' with about 5,100 gallons of water. With the included 3’ deck the footprint is roughly 18' by 31', plus whatever setback your city or county requires from property lines and the house. We confirm the setback and draw the site plan before anything is signed.

How deep is the Corinthian 12 BME?

The Corinthian 12 BME runs from 3'6" in the shallow end to 5'5" at the deep end. Like every fiberglass pool it is not rated for a diving board.

Does the Corinthian 12 BME have a tanning ledge?

Yes. The tanning ledge is part of the Corinthian 12 BME shell itself, not an add-on. A separate spa shell can be built alongside and is quoted as its own line.

How long does it take to fill the Corinthian 12 BME?

About 9 hours for 5,100 gallons from a standard garden hose. We start the fill the day the shell is set and plumbed; most projects go from dig to swim-ready in 2–4 weeks once the permit is in hand.


Backed by Latham. Installed by a Grand Dealer.

Latham Pool Grand Builder seal

Neighborhood Pool Service is a Latham Grand Dealer — the top tier of Latham’s dealer network. Your Corinthian 12 BME ships from Latham’s factory. Our licensed local crew installs it to Latham’s specs (CSLB #1139527, verify). And Latham backs the shell with its limited lifetime structural warranty.

California protects pool buyers — and we follow the law to the letter

Under California law (Business & Professions Code §7159), a licensed contractor may collect a down payment of no more than $1,000 or 10% of the contract price, whichever is less. So no matter the size of your project, we will never ask for more than $1,000 down. And we only bill for work after it is done. If any pool company asks you for a 20–50% deposit up front, that is a red flag. It’s also illegal.


Get your exact Corinthian 12 BME price

You already know the starting price — it’s printed above. Tell us where the pool is going. We’ll come out, walk the yard, and put a real number in writing. It’s free, and usually done within a couple of days. And if you go ahead, California law caps your down payment at the lesser of 10% or $1,000.

Consent to receive text messages is not a condition of purchase. You will still receive your quote if you leave this box unchecked. See our Privacy Policy and SMS Terms.


Similar small models

Latham Olympia 12 empty fiberglass pool shellRectangle

Olympia 12

12' x 26' · 3'6" – 5'6" deep · ~7,600 gal

A clean rectangle with a tanning ledge and steps on every side.

2026 Key Model saleTanning ledge

from $49,995 $59,995

View model →
Latham Corinthian 12 empty fiberglass pool shellRectangle

Corinthian 12

12' x 25' · 3'6" – 5'5" deep · ~5,100 gal

A timeless rectangle with a full-width tanning ledge and clean lines.

Tanning ledge

from $58,995

View model →
Latham Tuscan 13.24 empty fiberglass pool shellRectangle

Tuscan 13.24

12'10" x 23'7" · 3'1" – 5'5" deep · ~6,100 gal

The best-selling rectangle in the lineup — tanning ledge, wide swim lane, clean shape.

Tanning ledge

from $56,995

View model →
← All 47 models & prices