Radiant Pools in the Central Valley
Vinyl liner pools with insulated aluminum walls · authorized Radiant pool dealer · installed from Hanford.
A Radiant pool is a vinyl liner pool built with insulated aluminum wall panels. Neighborhood Pool Service is an authorized Radiant pool dealer, based in Hanford. Below, in plain words, is what a Radiant pool is, how it installs, what it costs, and how to tell whether it or fiberglass fits your yard. We sell both.
What is a Radiant pool?
A Radiant pool is a vinyl liner pool. Its walls are insulated aluminum panels rated R-10, and a vinyl liner holds the water. Radiant makes its pools in the U.S. The company joined Latham on November 30, 2021, and is now a Latham brand. Latham says the panels “use technology developed for NASA.”
Latham also says the insulated panels “save energy by retaining heat so you can run your heater less.” Your own results will depend on your yard, your heater and how you use the pool.
How can a Radiant pool be installed?
Radiant says its pools can be installed “above ground, semi-inground, into a hill or fully inground.” Those are four different jobs. A semi-inground pool sits partly in the ground and partly above it. Here is how each one looks at our end.
Above ground
Our above-ground Radiant package has no excavation and takes about one week. The pool sits on a prepared site. If you want the pool at ground level or lower, that is a different job.

A Radiant above-ground pool. Photo: Radiant Pools.
Semi-inground
Part of the pool goes into the ground and part stays above. This job includes digging, so it is a larger scope than an above-ground pool. We scope it on site and write it up in your estimate.

A Radiant semi-inground pool. Photo: Radiant Pools.
Into a hill
Latham lists “into a slope” as an option and says uneven terrain is no problem for these installs. Every slope is different, so we walk yours before we say what is possible.
Fully inground
Radiant also makes pools for a fully inground install. That is an excavation job too. We scope the dig, the equipment and the finish around your yard.

A Radiant inground pool. Photo: Radiant Pools.
What does a Radiant pool cost?
With us, in the Central Valley, prices run from $24,995 for a plunge pool kit that you put up yourself to $120,000 or more for a custom inground Radiant pool. Where your pool lands depends on its size, how far it goes into the ground, and what you add. Your written estimate gives the one number for your yard.
The $24,995 pool: a plunge pool kit, delivered
The starting price is for the Calypso II plunge pool. It is sold under the Latham name, and Latham owns Radiant. The pool is 8 feet by 16 feet, with full-width steps inside. Latham lists its walls as R-10 insulated panels and shows it as an inground or semi-inground pool (Latham website, read November 11, 2026). The kit is pre-designed, so the price is set. For $24,995 you get:
- The complete kit: insulated wall panels, hardware, coping, a vinyl liner in your choice of pattern, the skimmer and the return fittings.
- Freight to your address.
- The build sheet: the installation manual and our checklist.
- Three visits from our crew: one to check the hole, one on the day the pool goes together, and one the next day as it fills.
You or your installer put the pool up. On this path the digging, the base, the pump and filter, the plumbing, the electrical, the backfill, the deck, the safety barrier and any permit are yours. Ask us and we will price a pump and filter package too.
What moves the price up from there?
When we install the pool, the price includes our crew, the equipment and the site work. These are the things that move it most:
- How the pool sits. Above ground has no digging. Semi-inground and inground add excavation, hauling, backfill and often concrete.
- Size and shape. A bigger pool takes a bigger kit and more labor.
- Equipment and add-ons. Automation, a heat pump, inside steps, lights and an automatic safety cover are each their own line on the estimate.
- Your site. Access, slope, soil, the electrical run and the drive from Hanford all count.
- Plans and permits, where your city or county asks for them.
A custom inground Radiant pool on a hard site, with plans, digging, concrete and add-ons, can reach $120,000 or more. Every estimate we write lists what is included and what is not.
What do Radiant pools cost elsewhere?
We found no price for a Radiant pool on Radiant’s website or on Latham’s. Latham’s website does say the average cost to install a semi-inground pool “typically starts at around $50,000.” That line is about semi-inground pools in general, not only Radiant (Latham website, read November 11, 2026).
Can you install a Radiant pool yourself?
Some owners do. Radiant says installing one “can be a quick and easy DIY job as with the Metric Series Round pool” (radiantpools.com, read November 11, 2026). A pool that goes into the ground is a bigger job. If you build it yourself, the permit, the electrical and the safety barrier are your job too. Ask your city or county what it needs before you order. The kit path above is how we help an owner who builds: you do the work, and we check it at the three points that matter.
What shapes and sizes does Radiant make?
Radiant sells two lines, Inground and Metric. Latham lists six standard shapes: Emerald, Freeform, Oval, Radiant Grecian, Rectangle and Round. Walls come in three heights: 42, 48 and 52 inches. Radiant says the Inground line comes in geometric and freeform shapes, and the Metric line in round, oval and freeform shapes. We help you pick a shape and height for your yard and your family.
What warranty does a Radiant pool have?
Radiant states a “100% lifetime, fully transferable, non-prorated warranty against manufacturing defects” (radiantpools.com, read November 11, 2026). Radiant says that if you sell your home, the warranty continues for the next owner.
The vinyl liner is a separate part. Radiant’s warranty page says the liner is covered separately, on its own limited terms. For how long a liner lasts, Latham says it is replaced “approximately once every 10 years” and can last “more than 15 years” with good care (Latham website, read November 11, 2026). Ask us for the current written warranty papers for your pool. The written papers are what count.
How does a Radiant install run with us?
One licensed local company runs the job: Neighborhood Pool Service LLC, CSLB #1139527 (verify it here), owned by Morgan Litchfield. We walk your yard. Then you get a written estimate for the pool type you choose.
- Above ground: no excavation, about one week.
- Semi-inground, into a hill or inground: a different scope, with excavation. The estimate spells out what is included.
- Permits: the answer depends on your city or county and on your site. The written estimate gives the answer for your yard.
Radiant or fiberglass: which fits you?
Both are good pools, and we sell both. The right one depends on your yard and what you want from it. Here is a fair look at the two.
- Radiant: a vinyl liner pool. It can go above ground, partly in the ground, into a slope or fully inground. It offers six shapes and three wall heights. The liner is a part that gets replaced over time.
- Fiberglass: one shell molded at Latham’s California plant and set by crane. There is no liner. The shell has a limited lifetime structural warranty when an approved installer sets it. The shape you pick is the shape you get. See our fiberglass pools →
Want a wider look at all the types? Read Types of Pools: Fiberglass, Concrete and Vinyl Liner Compared. We are also the Central Valley’s Latham pool dealer.
Radiant pool questions, answered
What is a Radiant pool?
A Radiant pool is a vinyl liner pool with insulated aluminum wall panels. A liner holds the water. The panels hold the shape. Radiant is made in the U.S. and has been part of Latham since November 30, 2021. We are an authorized Radiant pool dealer.
What is a vinyl liner pool?
It is a pool with a flexible vinyl sheet inside a rigid wall. The wall gives the pool its shape and strength. The liner is the waterproof surface you see and touch. A fiberglass pool has no liner. It is one molded shell.
Is a Radiant pool a semi-inground pool?
It can be. Radiant says its pools can be installed “above ground, semi-inground, into a hill or fully inground.” Which one fits depends on your yard. We look at the slope and the space and tell you what we would do.
Does a Radiant pool need a permit?
That depends on your city or county and on your site. We do not guess. We check your site and put the answer in your written estimate.
What does the Radiant warranty cover?
Radiant states a “100% lifetime, fully transferable, non-prorated warranty against manufacturing defects.” Radiant’s warranty page also says the vinyl liner is covered separately, on its own limited terms. Ask us for the current written warranty papers. The written papers are what count.
How long does a vinyl liner last?
Latham says on its Radiant page that a liner is replaced “approximately once every 10 years,” and that one can last “more than 15 years” with good care (Latham website, read November 11, 2026). Your water care and your site matter.
What does a Radiant pool cost?
With us, in the Central Valley, prices run from $24,995 to $120,000 or more. $24,995 is for a Calypso II plunge pool kit, 8 feet by 16 feet, delivered, with three visits from our crew. You or your installer put it up. A custom inground Radiant pool can reach $120,000 or more. Size, how far the pool goes into the ground, equipment and your site set the price. Your written estimate gives the one number for your yard.
Can I install a Radiant pool myself?
Some owners do. Radiant says installing one “can be a quick and easy DIY job as with the Metric Series Round pool” (radiantpools.com, read November 11, 2026). A pool that goes into the ground is a bigger job. We sell a plunge pool kit for $24,995, delivered, with three visits from our crew while you build. The permit, the electrical and the safety barrier are the owner’s job on that path.
Where do you install Radiant pools?
We are based in Hanford and serve Fresno, Visalia and the rest of the south Central Valley. See the service area →
Get a written estimate for your yard
Tell us about your yard and which way you are leaning: Radiant, fiberglass, or not sure yet. We will walk the site and give you a written estimate. That is the way to know what a pool would take. See how buying a pool works →
Neighborhood Pool Service LLC, Hanford, CA · CSLB #1139527 · Owner: Morgan Litchfield. We are an independent, locally owned contractor and an authorized Radiant dealer. We are not an agent or employee of Radiant or Latham.
Last updated November 11, 2026
